930M Waste Handler Small Wheel Loader
The Cat® 930M Waste Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A complete range of guarding and debris management solutions are available to meet the needs of the most demanding environments. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Maximum Gross Power
168 hp
125 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 hp
125 kW
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
795 N·m
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 hp
119 kW
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
588 ft·lbf
797 N·m
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
777 N·m
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V and Korea Tier 4 Final emission standards.
Engine Model
Cat® C7.1
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Net Torque - ISO 9249:2007 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Maximum Net Torque - ISO 9249:2007 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 hp
122 kW
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 hp
125 kW
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 hp
122 kW
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 hp
122 kW
Engine Power - ISO 14396 - Metric
170 hp
125 kW
Engine Power - ISO 14396:2002
168 hp
125 kW
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 hp
119 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 hp
116 kW
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Net Power (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 hp
116 kW
Net Power (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Buckets
Bucket Capacities
3.0-5.0 m3 (3.9-6.5 yd3)
Operating Specifications
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
Full Turn Tip Load (2)
9525 kg (20,998 lb)^
Full Turn Tip Load (1)
8573 kg (18,900 lb)**
Weights
Operating Weight
37713 lb
17107 kg
Note (2)
^Dimensions listed are for a machine configured with standard counterweights, waste guarding, rear waste gate, 80 kg (176 lb) operator, and new solid tires.
Note (1)
**Dimensions listed are for a machine configured with optional counterweights, waste guarding, 80 kg (176 lb) operator, and Michelin 20.5 R25 XMINE D2 tires.
Operating Weight (1)
15 381 kg (33,908 lb)**
Operating Weight (2)
17 107 kg (37,713 lb)^
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 LEVEL II
Note (1)
* Measurements were conducted at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
– The Blue Angel environmental label is an optional attachment for Europe only.
– The Blue Angel environmental label is an optional attachment for Europe only.
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)
68 dB(A)
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
101 dB(A)
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the flourinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Loader Hydraulic System
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Maximum Working Pressure - Implement Pump
3771 psi
26000 kPa
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi
28000 kPa
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
160 l/min
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the touch screen display when equipped.
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
28000 kPa
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
190 l/min
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
728 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.9 in
150 mm
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.7 in
120 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.6 in
65 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3.5 in
90 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
555 mm
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Maximum Steering Torque - 0° (Straight Machine)
37155 ft·lbf
50375 N·m
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Maximum Steering Torque - 40° (Full Turn)
27747 ft·lbf
37620 N·m
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Transmission
Forward and Reverse - Range 4
25 mile/h
40 km/h
Forward and Reverse - Range 3
17 mile/h
27 km/h
Forward and Reverse - Range 2
8 mile/h
13 km/h
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the touch screen display when equipped. Factory default is 7 km/h (4.4 mph).
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Note (3)
Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Note (2)
Offset rims available to meet European roading requirements.
Rear Axle
Oscillating
Front Axle
Fixed
Brakes - Parking
Spring applied hydraulically released
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle - Traction Aid
Locking differential
Rear Axle - Traction Aid - Optional
Limited slip differential
Brakes - Service
Inboard wet disc
Rear Axle - Oscillation Angle by Tire Size - Solid Tires, 750/65, 620/65, Skidder
± 7 degrees
Service Refill Capacities
Cooling System
7.9 gal (US)
30 l
Engine Crankcase
5.3 gal (US)
20 l
Axles - Rear
6.6 gal (US)
25 l
Hydraulic Tank
23.8 gal (US)
90 l
Transmission - Gear Box
2.2 gal (US)
8.5 l
Fuel Tank
51.5 gal (US)
195 l
Axles - Front
6.9 gal (US)
26 l
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Sustainability
Recyclability
94%
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
