930M Aggregate Handler Small Wheel Loader
The Cat® 930M Aggregate Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. The optimized Z-bar loader linkage combined with long wear life Performance Series buckets delivers improved payloads and bucket longevity. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Maximum Gross Power
168 HP
125 kW
Bore
4 in
105 mm
Stroke
5 in
135 mm
Displacement
427 in³
7.01 l
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
119 kW
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
586 ft·lbf
795 N·m
Note (3)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
125 kW
Maximum Rated Gross Power - ISO 14396
168 HP
125 kW
Note (2)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Net Torque - SAE J1349 (Performance Power Mode: Range 1-4)
588 ft·lbf
797 N·m
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3*)
573 ft·lbf
777 N·m
Engine Model
Cat® C7.1
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Emissions
The Cat C7.1 engine meets U.S. EPA Tier 4 Final, EU Stage V and Korea Tier 4 Final emission standards.
Note (1)
*Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
122 kW
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
122 kW
Maximum Gross Power - ISO 14396 (metric) (Performance Power Mode: Range 1-4)
170 HP
125 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
122 kW
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
116 kW
Maximum Rated Gross Power - ISO 14396 (metric)
170 HP
125 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
158 HP
116 kW
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3*)
572 ft·lbf
776 N·m
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3*)
162 HP
119 kW
Net Power (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3*)
156 HP
116 kW
Net Power (Standard Power Mode: Range 1-3*)
1600 r/min
1600 r/min
Buckets
Bucket Capacities
2.5-5.0 m3 (3.3-6.5 yd3)
Weights
Operating Weight
31848 lb
14446 kg
Cab
ROPS
ISO 3471:2008
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25, 550/65, 600/65, 650/65
± 10.5 degrees
Rear Axle
Oscillating
Loader Hydraulic System
Lift Cylinder, Double Acting - Rod Diameter
2.6 in
65 mm
Power Train
Brakes - Parking
Spring applied hydraulically released
Transmission
Forward and Reverse - Range 3
17 mile/h
27 km/h
Service Refill Capacities
Rear Axles
6.6 gal (US)
25 l
Transmission
Note
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
160 l/min
Transmission
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Loader Hydraulic System
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Transmission
Forward and Reverse - Range 2
8 mile/h
13 km/h
Service Refill Capacities
Front Axles
6.9 gal (US)
26 l
Cab
Declared Sound Levels
Declared Sound Levels
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
– Operator Sound Pressure Level (ISO 6396:2008): 68 dB(A)*
– Exterior Sound Power Level (ISO 6395:2008): 101 dB(A)*
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4061 psi
28000 kPa
Steering
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Raise (Ground Level to Maximum Lift)
5.1/5.7 seconds
Service Refill Capacities
Hydraulic Tank
23.8 gal (US)
90 l
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Dump (at Maximum Lift Height)
1.5/1.7 seconds
Service Refill Capacities
Engine Crankcase
5.3 gal (US)
20 l
Loader Hydraulic System
Lift Cylinder, Double Acting - Stroke
28.7 in
728 mm
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Loader Hydraulic System
Tilt Cylinder, Double Acting - Rod Diameter
3.5 in
90 mm
Tilt Cylinder, Double Acting - Stroke
21.9 in
555 mm
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Loader Hydraulic System
Lift Cylinder, Double Acting - Bore Diameter
4.7 in
120 mm
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4061 psi
28000 kPa
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US)
8.5 l
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
3771 psi
26000 kPa
Power Train
Rear Axle - Traction Aid - Optional
Limited slip differential
Front Axle
Fixed
Service Refill Capacities
Cooling System
7.9 gal (US)
30 l
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Power Train
Brakes - Service
Inboard wet disc
Steering
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Float Down (Maximum Lift to Ground Level)
2.7/2.7 seconds
Power Train
Note (2)
Offset rims available to meet European roading requirements.
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Loader Hydraulic System
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Service Refill Capacities
Fuel Tank
51.5 Gal
195 l
Loader Hydraulic System
Tilt Cylinder, Double Acting - Bore Diameter
5.9 in
150 mm
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Front Axle - Traction Aid*
Locking differential (standard)
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
3771 psi
26000 kPa
Note (3)
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cab
FOPS
ISO 3449:2005 LEVEL II
Transmission
Forward and Reverse - Range 4
25 mile/h
40 km/h
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential – 1430. The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Power Train
Note (3)
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph) on the 930M.
Loader Hydraulic System
Cycle Times - Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm - Total Cycle Time
9.3/10.1 seconds
Power Train
Note (1)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Cab
Note (1)
* Measurements were conducted with cab doors and windows closed and at 70% of maximum engine cooling fan speed. Sound level may vary at different engine cooling fan speeds.
Loader Hydraulic System
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
190 l/min
Weights
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Operating Weight (1)
14 374 kg (31,689 lb)**
Operating Specifications
Note (2)
~Aggregate Handler equipped with full counterweight, optional guards, roading fenders, and cold start package.
Note (1)
**Aggregate Handler machine equipped with full counterweight and optional guards.
Full Turn Tip Load (2)
9302 kg (20,507 lb)~
Weights
Operating Weight (2)
14 446 kg (31,848 lb)~
Operating Specifications
Full Turn Tip Load (1)
9203 kg (20,289 lb)**
Sustainability
Recyclability
94%
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
