930M Ag Handler Small Wheel Loader
The Cat® 930M Ag Handler sets a new standard for productivity, fuel efficiency and comfort. A high torque, low speed C7.1 engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. A power boost in Range 1 for silage work maximizes productivity, while a boost in Range 4 gets you to the farm or field faster. Extremely low sound levels, large spacious cab and intuitive controls keep you working comfortably all day and even all night! Experience this industry benchmark.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Maximum Gross Power
168 HP
125 kW
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
815 N·m
Stroke - Performance Power Mode: Range 1-4
5.3 in
135 mm
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1800 r/min
1800 r/min
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m
588 ft·lbf
Displacement (Performance Power Mode: Speed Range 1-4)
428 in³
7.01 l
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Engine Model
Cat® C7.1
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Maximum Rated Gross Power - ISO 14396
168 HP
125 kW
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 HP
127 kW
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
125 kW
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Bore (Standard Power Mode: Range 1-4)
4.1 in
105 mm
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
116 kW
Stroke (Standard Power Mode: Range 1-3**)
5.3 in
135 mm
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
116 kW
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1600 r/min
1600 r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
166 HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
122 kW
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 HP
158 HP
Bore (Standard Power Mode: Range 1-3**)
4.1 in
105 mm
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
796 N·m
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m
586 ft·lbf
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m
572 ft·lbf
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
122 kW
Displacement (Standard Power Mode: Range 1-3**)
428 in³
7.01 l
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 HP
119 kW
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 HP
162 HP
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf
777 N·m
Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp
170 mhp
Buckets
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Weights
Operating Weight
31382 lb
14235 kg
Cab
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Steering
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Loader Hydraulic System
Relief Pressure - Tilt Cylinder
4351 psi
30000 kPa
Steering
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.5 turns
3.5 turns
Tires
Standard Size
20.5 R25, radial (L-3)
Service Refill Capacities
Transmission - Gear Box
2.2 gal (US)
8.5 l
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10.1 s
10.1 s
Maximum Flow - Implement Pump
50 gal/min
190 l/min
Service Refill Capacities
Cooling System
7.9 gal (US)
30 l
Loader Hydraulic System
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
160 l/min
Service Refill Capacities
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
19 l
Cab
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
101 dB(A)
Power Train
Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Service Refill Capacities
Fuel Tank
51.5 gal (US)
195 l
Steering
Maximum Flow - Steering Pump
34 gal/min
130 l/min
Loader Hydraulic System
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Transmission
Forward - Range 2
8 mile/h
13 km/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
1.5 s
1.5 s
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Power Train
Rear Axle
Oscillating
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9.3 s
9.3 s
Steering
Steering Cylinder, Double Acting - Bore Diameter
2.8 in
70 mm
Steering Cylinder, Double Acting - Stroke
17.2 in
438 mm
Power Train
Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Buckets
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)
Operating Specifications
Full Turn Tip Load
19424 lb
8811 kg
Transmission
Reverse - Range 4
25 mile/h
40 km/h
Service Refill Capacities
Axles - Rear
6.6 gal (US)
25 l
Air Conditioning System
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.
Service Refill Capacities
Hydraulic System - Including Tank
43.6 gal (US)
165 l
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
2.7 s
2.7 s
Cab
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)
68 dB(A)
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5.1 s
5.1 s
Steering
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Loader Hydraulic System
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
2.7 s
2.7 s
Service Refill Capacities
Engine Crankcase
5.3 gal (US)
20 l
Tires
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4061 psi
28000 kPa
Steering
Maximum Working Pressure - Steering Pump
3500 psi
24130 kPa
Power Train
Front Axle
Fixed
Tires
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Transmission
Reverse - Range 2
8 mile/h
13 km/h
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
1.7 s
1.7 s
Transmission
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintained at 13 km/h (8 mph) in Range 1 for a quick reverse.
Forward - Range 3
17 mile/h
27 km/h
Steering
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
2.8 s
2.8 s
Service Refill Capacities
Axles - Front
6.9 gal (US)
26 l
Hydraulic Tank
23.8 gal (US)
90 l
Steering
Steering Articulation Angle - Each Direction
40°
Axles
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Loader Hydraulic System
Maximum Working Pressure - Implement Pump
4061 psi
28000 kPa
Transmission
Forward - Range 4
25 mile/h
40 km/h
Steering
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2.4 s
2.4 s
Axles
Front
Fixed; Locking differential (standard)
Transmission
Reverse - Range 3
17 mile/h
27 km/h
Power Train
Front Axle - Traction Aid*
Locking differential standard
Steering
Steering Cylinder, Double Acting - Rod Diameter
1.6 in
40 mm
Loader Hydraulic System
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4351 psi
30000 kPa
Power Train
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees
Transmission
Reverse - Range 1*
8 mile/h
13 km/h
Cab
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab windows closed.
Loader Hydraulic System
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Power Train
Brakes - Service
Inboard wet disc
Rear Axle - Traction Aid
Limited slip differential optional
Brakes - Parking
Spring applied hydraulically released
Tires
Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Loader Hydraulic System
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
5.7 s
5.7 s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
190 l/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4.3 in
110 mm
Tilt Cylinder: Standard Lift Linkage - Stroke
21.9 in
555 mm
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
2.8 in
70 mm
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2.4 in
60 mm
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5.1 in
130 mm
Lift Cylinder: Standard Lift Linkage - Stroke
28.7 in
728 mm
Power Train
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees
Dimensions with Bucket - Standard Lift
Height - Ground Clearance**
1.3 ft
397 mm
Dimensions with Bucket - High Lift
Length - Rear Axle to Bumper
6.5 ft
1993 mm
Dimensions with Bucket - Standard Lift
Rack Angle at Carry
43 °
43 °
Dimensions with Bucket - High Lift
Departure Angle
33 °
33 °
Height - Overall**
18.7 ft
5698 mm
Dimensions with Bucket - Standard Lift
Departure Angle
33 °
33 °
Dimensions with Bucket - High Lift
Reach - Bucket at 45°*
4.4 ft
1339 mm
Dimensions with Bucket - Standard Lift
Length - Wheel Base
9.8 ft
3000 mm
Length - Rear Axle to Bumper
6.5 ft
1993 mm
Turning Radius - Over Bucket
19.5 ft
5952 mm
Carry Height - Bucket Pin
1.3 ft
390 mm
Width - Over Tires
8.3 ft
2540 mm
Dimensions with Bucket - High Lift
Dump Angle at Full Lift
48 °
48 °
Dimensions with Bucket - Standard Lift
Note (2)
**Vary with tire.
Dimensions with Bucket - High Lift
Width - Bucket
8.4 ft
2550 mm
Dimensions with Bucket - Standard Lift
Dig Depth**
3.9 in
100 mm
Turning Radius - Outside of Tires
17.7 ft
5402 mm
Clearance - Level Bucket**
11.75 ft
3580 mm
Clearance - Bucket at 45°*
9.1 ft
2779 mm
Rack Angle at Full Lift
54 °
54 °
Height - Overall**
17.1 ft
5205 mm
Dimensions with Bucket - High Lift
Length - Wheel Base
9.8 ft
3000 mm
Dimensions with Bucket - Standard Lift
Width - Bucket
8.4 ft
2550 mm
Height - Ground to Axle Center**
2.25 ft
685 mm
Dimensions with Bucket - High Lift
Width - Tread Center
6.3 ft
1930 mm
Dimensions with Bucket - Standard Lift
Height - Bucket Pin**
12.8 ft
3907 mm
Dimensions with Bucket - High Lift
Length - Hitch to Front Axle
4.9 ft
1500 mm
Dimensions with Bucket - Standard Lift
Operating Weight
31125 lb
14118 kg
Dimensions with Bucket - High Lift
Height - Ground to Axle Center**
2.25 ft
685 mm
Note (1)
*Vary with bucket.
Dimensions with Bucket - Standard Lift
Width - Tread Center
6.3 ft
1930 mm
Turning Radius - Inside of Tires
9.4 ft
2851 mm
Reach - Bucket at 45°*
3.6 ft
1102 mm
Dimensions with Bucket - High Lift
Clearance - Bucket at 45°*
10.7 ft
3272 mm
Height - Bucket Pin**
14.4 ft
4400 mm
Dimensions with Bucket - Standard Lift
Length - Overall*
24.9 ft
7593 mm
Dimensions with Bucket - High Lift
Height - Ground to Beacon**
12.2 ft
3707 mm
Carry Height - Bucket Pin
1.9 ft
582 mm
Clearance - Load over Height**
11.6 ft
3550 mm
Turning Radius - Outside of Tires
17.7 ft
5402 mm
Dimensions with Bucket - Standard Lift
Clearance - Load over Height**
10.9 ft
3331 mm
Dimensions with Bucket - High Lift
Turning Radius - Over Bucket
20.6 ft
6272 mm
Rack Angle at Full Lift
51 °
51 °
Rack Angle at Carry
47 °
47 °
Length - Overall*
27 ft
8235 mm
Note (2)
**Vary with tire.
Height - Ground to Cab**
10.9 ft
3340 mm
Dimensions with Bucket - Standard Lift
Length - Hitch to Front Axle
4.9 ft
1500 mm
Dimensions with Bucket - High Lift
Turning Radius - Inside of Tires
9.4 ft
2851 mm
Clearance - Level Bucket**
13.4 ft
4073 mm
Width - Over Tires
8.3 ft
2540 mm
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dimensions with Bucket - Standard Lift
Height - Ground to Beacon**
12.2 ft
3707 mm
Articulation Angle
40 °
40 °
Dimensions with Bucket - High Lift
Dig Depth**
5.3 in
135 mm
Articulation Angle
40 °
40 °
Operating Weight
31441 lb
14262 kg
Dimensions with Bucket - Standard Lift
Height - Ground to Cab**
10.9 ft
3340 mm
Dimensions with Bucket - High Lift
Height - Ground Clearance**
1.3 ft
397 mm
Dimensions with Bucket - Standard Lift
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Dump Angle at Full Lift
48 °
48 °
Sustainability
Recyclability
94%
Standard Equipment
POWER TRAIN
HYDRAULICS
ELECTRICAL
OPERATOR ENVIRONMENT
OTHER STANDARD EQUIPMENT
