Cat Water Solutions: 777 (07) Off-Highway Water Truck
Cat® Water Solutions helps you efficiently reduce haul road dust to enhance safety and increase productivity at your job site, quarry, or mine. A fully integrated truck, tank, and water delivery system – connected with scalable levels of technology helps you solve overwatering and underwatering issues with a focus on sustainable operations. This turnkey solution with Cat branded tank offerings is sold and supported by the local Cat dealer you know and trust.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Engine Model
Cat® C32B
Gross Power - SAE J1995
1025 HP
765 kW
Engine Speed
1800 r/min
1800 r/min
Net Power - SAE J1349
916 HP
683 kW
Emissions
Fuel Optimized
Cylinders
12
Bore
5.7 in
145 mm
Stroke
6.4 in
162 mm
Displacement
1959 in³
32.1 l
Note (1)
Net Power advertised is the power available at the flywheel when
the engine is equipped with fan, air cleaner, muffler, and alternator
with engine speed at 1,800 rpm.
Note (2)
Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
Note (3)
Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
Note (4)
No engine derating required up to 2286 m (7,500 ft) for Tier 4/Stage V.
Note (5)
Available as Tier 4 Final/Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards.
Cat Water Delivery System (WDS)
Maximum water flow
1200 gal(US)/min
3785 l/min
Water per spray head (minimum)
35 gal(US)/min
130 l/min
Water per spray head (maximum)
600 gal(US)/min
2270 l/min
Spray head opening range (minimum)
0.04 in
1 mm
Spray head opening range (maximum)
0.75 in
19 mm
Maximum size debris flushed through spray head
0.75 in
19 mm
Spray system hydraulic tank capacity
7.25 gal (US)
27.5 l
Maximum number of rear spray heads
5
Minimum number of rear spray heads (recommended 3)
2
Minimum number of front/side spray heads
2
Maximum number of front/side spray heads
0
Maximum water from cannon (idle)
600 gal(US)/min
2271 l/min
Maximum water from cannon (high idle)
1250 gal(US)/min
4732 l/min
Maximum cannon spray distance
200 ft
61 m
Type
Wet water pump/hydraulic motor coupling
Note
Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.05-0.2 gal/ft² (3 mph - 25 mph). Coverage rates above 0.6 L/m² may not be available at higher speeds depending on head count and configuration.
Note (1)
Opening is automatically controlled by the system to achieve AutoMode Coverage or Manual Mode Flow Rate.
Note (2)
AutoMode Spray controls water coverage automatically to the number of heads being used and ground speed achieved.
Note (3)
Manual Mode allows the operator to set a water flow rate that is constant regardless of ground speed.
Note (4)
Spray Heads on competitive water distribution systems require tools and maintenance to change flow and spray pattern. Caterpillar is the only company to have variable active spray heads to regulate water spray.
Note (5)
Water flow is continually adjusted during operation to conserve water and achieve desired coverage and flow rate
Tank Configurations
Water Tank Capacity
up to 75 700 L (20,000 gal)
Operating Specifications
Top Speed - Loaded
41.7 mile/h
67.1 km/h
Note
Water Tank Capacity Range: 69 700 - 75 700 L (18,400 - 20,000 gal)
Tank Configurations
Note
Multiple tank configurations are offered based on customer preference and regional locations. Water Tank Capacity Range: 75 400 - 75 700 L (19,900 - 20,000 gal)
Machine Weight (with water tank full)
327,964 - 327,964 lb / 147 172 - 148 762 kg
Empty Machine Operating Weight (without water / with fuel)
160,307 - 162,323 lb / 72 714 - 73 629 kg
Water Tank - Max Empty Weight (no WDS)
42,983 - 44,092 lb / 19 497 - 20 000 kg
Note (1)
Cat branded tanks include additional features and options commonly selected by customers in the industry. Splash guards, fill chute, and rock ejectors are standard.
Operating Specifications
Note (2)
Operator selectable coverage: 0.2-0.8 L/m² (4 kph - 40 kph) / 0.5-0.2 gal/ft² (3 mph - 25 mph)
Tank Configurations
Note (2)
Hoist cylinder mounting on all tank offerings enhances serviceability.
Weights - Approximate
Target Gross Machine Weight
363000 lb
164654 kg
Chassis Weight
115217 lb
52262 kg
Transmission
Forward - 1
6.6 mile/h
10.7 km/h
Forward - 2
9.1 mile/h
14.6 km/h
Forward - 3
11.9 mile/h
19.2 km/h
Forward - 4
16.6 mile/h
26.7 km/h
Forward - 5
22.5 mile/h
36.2 km/h
Forward - 6
30.2 mile/h
48.6 km/h
Forward - 7
40.9 mile/h
65.9 km/h
Reverse
7.5 mile/h
12.1 km/h
Note
Maximum travel speeds with standard 27.00R49 (E4) tires.
Final Drives
Differential Ratio
2.736:1
Planetary Ratio
7.0:1
Total Reduction Ratio
19.1576:1
Braking System
Brake Surface - Front
6331 in²
40846 cm²
Brake Surface - Rear
15828 in²
102116 cm²
Brake Standards
ISO 3450:2011
Body Hoists
Pump Flow - High Idle
6331 gal/min
458 l/min
Relief Valve Setting - Raise
2750 psi
18950 kPa
Relief Valve Setting - Lower
500 psi
3450 kPa
Body Raise Time - High Idle
15 s
15 s
Body Lower Time - Float
13 s
13 s
Body Lower Time - High Idle
13 s
13 s
Weight Distributions - Approximate
Front Axle - Empty
46 %
46 %
Front Axle - Loaded
33 %
33 %
Rear Axle - Empty
54 %
54 %
Rear Axle - Loaded
67 %
67 %
Suspension
Empty Loaded Cylinder Stroke Front
2.9 in
74.7 mm
Empty Loaded Cylinder Stroke Rear
2.5 in
66 mm
Rear axle - Oscillation
5.4 °
5.4 °
Steering
Steering Standards
ISO 5010:2007
Steer Angle
30.5 °
30.5 °
Turning Diameter - Front
83 ft
25.3 m
Turning Circle - Clearance Diameter
93 ft
28.4 m
Tires
Standard Tire
27.00R49 (E4)
Note (1)
Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
Note (2)
Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
Service Refill Capacities
Fuel Tank (1)
300 gal (US)
1136 l
Fuel Tank (2)
350 gal (US)
1325 l
Cooling System
63.4 gal (US)
240 l
Crankcase
28.7 gal (US)
109 l
Differentials
59.9 gal (US)
227 l
Final Drive - Each
20 gal (US)
76 l
Steering System - Including Tank
14.1 gal (US)
53.6 l
Brake Hoist System
85 gal (US)
322 l
Torque Converter - Transmission System
36.5 gal (US)
138.5 l
Cab
Air Conditioning
18390 Btu/lb
42789 Btu/kWh
Heater / Defroster
43930 Btu
11070 kJ/kg
ROPS Standards (1)
Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
FOPS Standards
Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Note (1)
The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with the cab doors and the cab windows closed.
Note (2)
The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid-gear moving operation is 83 dB(A).
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Standard Equipment
NOTE
POWERTRAIN
SUSPENSION SYSTEMS
ELECTRICAL
OPERATOR ENVIRONMENT
CAT TECHNOLOGY PRODUCTS
GUARDS
FLUIDS
OTHER STANDARD EQUIPMENT
CAT WATER DELIVERY SYSTEM (WDS)
Cat Branded Water Tank Offerings with Options
