MH3026 Wheel Material Handler

We know that when it comes to material handling equipment, your success depends on productivity and low operating costs. The Cat® MH3026 has simple-to-use technologies, a redesigned cab for enhanced comfort, and more machine options to match your work. Combine these features with up to 10 percent lower operating costs and you have a safe, quality, and reliable product that will provide you with the superior performance you need for your toughest indoor material handling applications.

Product Brochures
Units: US Metric
Engine Model
Cat C7.1
Net Power - ISO 9249
171 HP
128 kW
Net Power - ISO 9249 (DIN)
174 hp (metric)
174 hp (metric)
Engine Power - Maximum - ISO 14396
174 HP
129 kW
Engine Power - ISO 14396 (DIN)
176 hp (metric)
176 hp (metric)
4.1 in
105 mm
5.3 in
135 mm
427.8 in³
7 l
Biodiesel Capability
Up to B20¹
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Maximum Gradeability (23 500 kg/51,810 lb)
Maximum Travel Speed (with steering wheel)
12.4 mile/h
20 km/h
Maximum Travel Speed (with joysticks)
9.3 mile/h
15 km/h
Drawbar Pull
28551 lb/ft
127 kN
Hydraulic System
Maximum Pressure - Implements
5366 psi
37000 kPa
Maximum Pressure - Travel
5076 psi
35000 kPa
Maximum Pressure - Swing
5656 psi
39000 kPa
Machine Weights
Maximum Operating Weight
64370 lb
29200 kg
Minimum Operating Weight
58200 lb
26400 kg
Service Refill Capacities
Fuel Tank Capacity
109.9 gal (US)
416 l
Service Refill Capabilities
Diesel Exhaust Fluid Tank
7.9 gal (US)
30 l
Cooling System
10.6 gal (US)
40 l
Service Refill Capacities
Engine Oil
5.3 gal (US)
20 l
Hydraulic Tank
55.2 gal (US)
209 l
Hydraulic System - Including Tank
91.1 gal (US)
345 l
Rear Axle - Housing (Differential)
3.7 gal (US)
14 l
Front Steering Axle - Differential
2.9 gal (US)
11 l
Service Refill Capabilities
Final Drive - Each
0.7 gal (US)
2.5 l
Service Refill Capacities
Powershift Transmission
0.7 gal (US)
2.5 l
Swing Mechanism
Maximum Swing Torque
51800 ft·lbf
70 kN·m
MH Boom 7.5 m (24'7")
Drop Nose 6.0 m (19'8")
Shipping Height (with OPG, without stick)
11.1 ft
3375 mm
Shipping Length
35.1 ft
10700 mm
Shipping Length (with push blade)
36.8 ft
11190 mm
Machine Length
17.9 ft
5450 mm
Machine Length (with push blade)
20.1 ft
6115 mm
Tail Swing Radius
9.2 ft
2800 mm
Counterweight Clearance
4.3 ft
1305 mm
Cab Height- Lowered
11 ft
3350 mm
Cab Height-Lowered with OPG
11.1 ft
3375 mm
Cab Height-Raised
18.9 ft
5750 mm
Cab Height-Raised with OPG
5775 mm
18.9 ft
Wheel Base
9 ft
2750 mm
Shipping Width
9.9 ft
2990 mm
Ground Clearance
1.1 ft
320 mm
Undercarriage Length
17.4 ft
5300 mm
Undercarriage Length (with push blade)
19.6 ft
5970 mm
Upper Frame Width (including handrails)
9 ft
2740 mm
Working Ranges
Maximum Reach
42.7 ft
13000 mm
MH Boom 7.5 m (24'7")
Drop Nose 6.0 m (19'8")
Maximum Height
46.9 ft
14270 mm
Minimum Dump Height
12.5 ft
3810 mm
Maximum Reach at Ground Line
42.2 ft
12850 mm
Maximum Depth
9.8 ft
2970 mm
Boom Pin Height
30.5 ft
9300 mm
Standard Equipment
Cat Technology
Electrical System
Service and Maintenance
Hydraulic System
Safety and Security
Undercarriage and Structures

Multi-Processor with Shear Jaws