MH3022 Wheel Material Handler
The Cat® MH3022 is a purpose-built material handler designed to deliver strong performance for your toughest waste and scrapyard applications. The MH3022 features simple-to-use technologies, a comfortable cab, and multiple boom and stick options to match your work. These features help create a safe, reliable product to take on the wide variety of challenges you face each day.
Specifications
Equipment
Product Brochures
Attachments
Units:
Engine
Engine Model
Cat C4.4
Net Power - ISO 9249
145 hp
108 kW
Net Power - ISO 9249 (DIN)
147 hp (metric)
147 hp (metric)
Engine Power - Maximum - ISO 14396
148 hp
110 kW
Engine Power - ISO 14396 (DIN)
150 hp (metric)
150 hp (metric)
Bore
4.1 in
105 mm
Stroke
5 in
127 mm
Displacement
268.5 in³
4.4 l
Biodiesel Capability
Up to B20¹
Emissions
Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)
Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)
¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. *Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). **Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.
Transmission
Maximum Travel Speed
12.4 mile/h
20 km/h
Drawbar Pull
28551 lb/ft
127 kN·m
Maximum Gradeability
65%
Hydraulic System
Maximum Pressure - Implements
5076 psi
35000 kPa
Maximum Pressure - Swing
5294 psi
36500 kPa
Maximum Pressure - Travel
5076 psi
35000 kPa
Swing Mechanism
Swing Speed
8 r/min
8 r/min
Maximum Swing Torque
39553 lbf·ft
54 kN·m
Weights
Operating Weight
54000 lb
24500 kg
Note
Operating weight includes full fuel tank, operator, 1400 kg (3,100 lb) work tool. Weight varies depending on configuration.
Service Refill Capacities
Fuel Tank Capacity
92.5 gal (US)
350 l
Cooling System
9.5 gal (US)
36 l
Engine Oil
3.4 gal (US)
13 l
Rear Axle - Housing (Differential)
3.7 gal (US)
14 l
Final Drive - Each
0.7 gal (US)
2.5 l
Powershift Transmission
0.7 gal (US)
2.5 l
Hydraulic System - Including Tank
91.1 gal (US)
345 l
Hydraulic Tank
40.9 gal (US)
155 l
Diesel Exhaust Fluid (DEF) Tank
7.9 gal (US)
30 l
Dimensions
Boom
MH 5.35 m (17'7")
Stick
4.3 m (14'1") Straight
Shipping Length
27.2 ft
8300 mm
Machine Length
16.2 ft
4950 mm
Tail Swing Radius
8.5 ft
2600 mm
Counterweight Clearance
4.3 ft
1300 mm
Cab Height- Lowered
11 ft
3350 mm
Cab Height-Lowered with OPG
11 ft
3350 mm
Cab Height-Raised
18.9 ft
5750 mm
Cab Height-Raised with OPG
18.9 ft
5750 mm
Wheel Base
8.5 ft
2600 mm
Shipping Width
8.3 ft
2540 mm
Ground Clearance
1 ft
310 mm
Undercarriage Length
16.1 ft
4900 mm
Working Ranges
Maximum Reach
30.4 ft
9280 mm
Boom
MH 5.35 m (17'7")
Stick
4.3 m (14'1") Straight
Maximum Height
35.3 ft
10760 mm
Minimum Dump Height
10.9 ft
3310 mm
Maximum Depth
4.8 ft
1460 mm
Boom Pin Height
23.4 ft
7120 mm
Air Conditioning System
Note (1)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.05 kg (2.31 lb) of refrigerant which has a CO2 equivalent of 1.502 metric tonnes (1.655 tons).
Standard Equipment
NOTE
Cab
Cat Technology
Electrical System
Service and Maintenance
Engine
Hydraulic System
Safety and Security
Undercarriage and Structures
